14
MEMORY SEATS
Set Memory Positions
With the ignition On or in Accessory mode:
1. Adjust the driver's seat, power outside mirrors and power steer-
ing column to the desired positions.
2. Press and release the SET button on the driver's door. A
beep will sound. Immediately press and hold button 1 until two
beeps sound.
Repeat these steps using button 2 for a second driver.
To store driver's seat and power steering column positions for
more clearance when exiting the vehicle, repeat steps 1 and 2
using the
Exit button.
Recall Positions
Press button 1, 2 or
Exit. Depending on vehicle state, the
button may need to be held down until the seat, mirrors and
power steering column reach the set position.
Note: To change the Auto Memory Recall settings, go to Comfort and
Convenience in the Vehicle Settings menu.
See Seats and Restraints in your Owner Manual.
ULTRAVIEW SUNROOF
♦
Open/Close the Sunshades
Press the
Front Sunshade switch on the overhead
console to open or close the front sunshade.
Press the
Rear Sunshade switch on the overhead
console or rear doors to open or close the rear sunshade.
Press the
Rear Window Sunshade switch on the over-
head console or rear doors to open or close the rear window
sunshade.
Open/Close the Sunroof
Pull the
TILT switch to vent the sunroof. Press the switch
to close the sunroof.
Fully pull the
SLIDE switch to express-open the sunroof.
Fully press the switch to express-close the sunroof.
See Keys, Doors and Windows in your Owner Manual.
