Cadillac 2016 ATS Manual Download Page 198

Page: 198 / 348

Cadillac ATS/ATS-V Owner Manual (GMNA-Localizing-MidEast-9369639) -

2016 - crc - 12/9/15

Driving and Operating

197

Engine Exhaust

{

Warning

Engine exhaust contains carbon
monoxide (CO), which cannot be
seen or smelled. Exposure to CO
can cause unconsciousness and
even death.

Exhaust may enter the vehicle if:

The vehicle idles in areas
with poor ventilation
(parking garages, tunnels,
deep snow that may block
underbody airflow or tail
pipes).

The exhaust smells or
sounds strange or different.

The exhaust system leaks
due to corrosion or damage.

The vehicle exhaust system
has been modified,
damaged, or improperly
repaired.

(Continued)

Warning (Continued)

There are holes or openings
in the vehicle body from
damage or aftermarket
modifications that are not
completely sealed.

If unusual fumes are detected or
if it is suspected that exhaust is
coming into the vehicle:

Drive it only with the
windows completely down.

Have the vehicle repaired
immediately.

Never park the vehicle with the
engine running in an enclosed
area such as a garage or a
building that has no fresh air
ventilation.

Running the Vehicle
While Parked

It is better not to park with the
engine running.

If the vehicle is left with the engine
running, follow the proper steps to
be sure the vehicle will not move.
See

and

If parking on a hill and pulling a
trailer, see

Driving Characteristics

and Towing Tips

238

Summary of Contents for 2016 ATS





























































































































































































































































































































































Search results

Summary of Contents for 2016 ATS

Reviews:

Related manuals for 2016 ATS

Brands by name

Popular brands

Cadillac 2016 ATS, Manual

Search results

Summary of Contents for 2016 ATS

Reviews:

Related manuals for 2016 ATS

Brands by name

Popular brands