Black plate (27,1)
Cadillac ATS Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-
6014430) - 2014 - CRC - 8/19/13
Instruments and Controls
5-27
Turn Arrow:
The Turn Arrow
display shows the next maneuver
when using route guidance.
Travel Time:
The Travel Time
display shows the estimated time
duration remaining for the current
route.
Distance to Destination:
The
Distance to Destination display
shows the distance to the
destination when using route
guidance.
Speed Limit:
The Speed Limit
display shows the current speed
limit. The information for this page
comes from a roadway database.
Speed Warning:
The Speed
Warning display allows the driver to
set a speed that they do not want to
exceed. To set the Speed Warning,
press SEL when Speed Warning is
displayed. Press
y
or
z
to adjust
the value. This feature can be
turned off by pressing and holding
SEL while viewing this page. If the
selected speed limit is exceeded, a
pop-up warning is displayed and a
chime may sound.
Cruise Set Speed:
The Cruise Set
Speed display shows the speed the
cruise control or Adaptive Cruise
Control is set to.
Follow Distance Indicator:
The
current follow time to the vehicle
ahead is displayed as a time value
on this page when ACC is not
engaged. When ACC has been
engaged, the Follow Distance
Indicator page switches to the gap
setting page. This page shows the
current gap setting along with the
vehicle ahead telltale.
Battery Voltage:
The Battery
Voltage display shows the current
battery voltage.
Oil Life:
The Oil Life display shows
an estimate of the oil's remaining
useful life. If REMAINING OIL LIFE
99% is displayed, that means 99%
of the current oil life remains.
When the remaining oil life is low,
the CHANGE ENGINE OIL SOON
message will appear on the display.
See
Engine Oil Messages on
page 5-34
. The oil should be
changed as soon as possible.
See
Engine Oil on page 10-11
. In
addition to the engine oil life system
monitoring the oil life, additional
maintenance is recommended in
the Maintenance Schedule. See
Maintenance Schedule on
page 11-3
.
Remember, the Oil Life display must
be reset after each oil change. It will
not reset itself. Also, be careful not
to reset the Oil Life display
accidentally at any time other than
when the oil has just been changed.
It cannot be reset accurately until
the next oil change. To reset the
engine oil life system, press and
hold SEL for several seconds while
the Oil Life display is active. See
Engine Oil Life System on
page 10-13
.