Cadillac 2013 Caddilac CTS, Owner'S Manual

Page: 70 / 482

Black plate (8,1)
Cadillac CTS/CTS-V Owner Manual - 2013 - CRC - 4/18/12
3-8 Seats and Restraints
B
(Exit Button): Moves the driver
seat and/or power steering column
to the exit position. See
“ Exit Recall ”
later in this section.
Storing Memory Positions
To save into memory:
1. Adjust the driver seat, outside
mirrors, and the power steering
column, if equipped, to the
desired driving positions.
2. Press and hold “ 1 ” until two
beeps sound.
3. Repeat for a second driver
using “ 2. ”
The vehicle comes with two Remote
Keyless Entry (RKE) transmitters.
Each transmitter has a number
“ 1 ” or “ 2 ” on it. These numbers
correspond to “ 1 ” and “ 2 ” on the
driver door. The current driver is
identified when
K
on the RKE
transmitter is pressed, or when
“ 1 ” or “ 2 ” on the driver door is
pressed.
To recall memory positions, press
and release
“ 1 ” or “ 2. ” The vehicle
must be in P (Park) for an automatic
transmission, or the parking brake
must be applied for a manual
transmission. A single beep will
sound when the button is pressed.
The seat, outside mirrors, and/or
power steering column will move to
the position previously stored for the
identified driver.
Automatic Entry Recall
If entry/exit recall is programmed on
in the vehicle personalization menu,
automatic entry recall occurs when
the ignition is turned on. See
Vehicle Personalization on
page 5
‑ 46 .
To stop recall movement, press one
of the power seat, memory,
or outside mirror buttons, or the
power steering column switch,
if equipped.
If something has blocked the driver
seat or the steering column while
recalling a memory position, the
recall may stop. Remove the
obstruction; then press the
appropriate control for the area that
is not recalling for two seconds. Try
recalling the memory position again
by pressing the appropriate memory
button. If the memory position is still
not recalling, see your dealer for
service.
Exit Recall
B
(Exit Button): Press to move
the driver seat back a preset
distance and/or the power steering
column, if equipped, up and forward.
A single beep sounds when the exit
feature activates. The vehicle must
be in P (Park) for an automatic
transmission, or the parking brake
must be applied for a manual
transmission.