Cadillac 2013 Caddilac CTS, Owner'S Manual

Page: 150 / 482

Black plate (28,1)
Cadillac CTS/CTS-V Owner Manual - 2013 - CRC - 4/18/12
5-28 Instruments and Controls
T
(Vehicle Information): Press
to scroll through the vehicle
information displays. See
“ Vehicle
Information Display Menu Items ”
following for more information.
U
(Customization): Press to scroll
through each of the customization
features. See
Vehicle
Personalization on page 5 ‑ 46 for
more information.
V
(Set/Reset): Press to reset
certain DIC features and to
acknowledge and clear DIC warning
messages.
y
or
z
(Menu Up/Down): Press
to scroll up and down the menu
items.
Trip/Fuel Display Menu Items
3
(Trip/Fuel): Press to display
the following menu items:
Odometer
Displays the distance the vehicle
has been driven in either
kilometers (km) or miles (mi).
Trip A or Trip B
Displays the current distance
traveled since the last reset for each
trip odometer in either
kilometers (km) or miles (mi). Both
odometers can be used at the same
time. Reset each trip odometer to
zero by pressing and holding the
set/reset button when Trip A or Trip
B is displayed.
Fuel Range
Displays the approximate remaining
kilometers (km) or miles (mi) you
can drive without refilling the fuel
tank. This estimate is based on the
current driving conditions and
changes if the driving conditions
change. For example, freeway
driving may produce better fuel
economy than city driving with
frequent stops, so the range would
adjust for that.
Once the range drops below about
48 km (30 mi) remaining, the display
shows Low Range.
If the fuel is low, the FUEL LEVEL
LOW message displays. See
“ Fuel
Level Low ” under Fuel System
Messages on page 5 ‑ 36 for more
information.
AVG (Average) Economy
Displays the approximate average
liters per 100 kilometers (L/100 km)
or miles per gallon (mpg). The
calculation is based on the number
of L/100 km (mpg) recorded since
the last time this display was reset.
Press the set/reset button to reset
to zero.
Timer
Can be used to measure time. For
example, timing how long it takes to
travel from one point to another. To
access the timer, press the trip/fuel
button until Timer 00:00:00 displays.
To turn on the timer, press the set/
reset button.
To turn off the timer, press the set/
reset button again. The timer
displays the end timing value.