manualshive.com logo in svg

Cadillac 2011 SRX CROSSOVER, Owner'S Manual

The Cadillac 2011 SRX CROSSOVER Owner's Manual is a comprehensive guide that provides all the necessary information and instructions you need to maximize your driving experience. Packed with valuable insights and tips, this manual is available for free download from manualshive.com, ensuring easy access to this must-have resource.

Share
Download
background image

Black plate (38,1)

Cadillac SRX Owner Manual - 2013 - 1st crc - 7/2/12

9-38

Driving and Operating

3. Move the control down to SET

−

and release it.

4. Remove foot from the

accelerator.

After ACC is set, it may immediately
apply the brakes if a vehicle is
closer than the selected follow gap.

The ACC indicator displays on the
instrument cluster. When the ACC is
active, the symbol will be lit.

Be mindful of speed limits,
surrounding traffic speeds, and
weather conditions when selecting
the set speed.

Resuming a Set Speed

If the ACC is set at a desired speed
and then the brakes are applied, the
ACC is disengaged without erasing
the set speed from memory.

To begin using ACC again, move
the control up RES briefly.
The vehicle returns to the previous
set speed.

Increasing Speed While ACC is at
a Set Speed

If ACC is already activated, do one
of the following:

.

Use the accelerator to get to the
higher speed. Move the control
toward SET

–

, then release it and

the accelerator pedal. The
vehicle will now cruise at the
higher speed.

When the accelerator pedal is
pressed, ACC will not brake
because it is overridden.
A warning message will appear
on the Driver Information Center
(DIC). See

Cruise Control

Messages on page 5

‑

31

.

.

Move the control RES
and hold until the desired set
speed appears on the display,
then release it.

.

To increase vehicle speed in
small amounts, move the control
RES and then release
it. Each time this is done, the
vehicle goes 1.6 km/h (1 mph)
faster.

When it is determined that there is
no vehicle in front of your vehicle
slower than the set speed, then the
vehicle speed will increase to the
set speed.

Reducing Speed While ACC is at a
Set Speed

If ACC is already activated, do one
of the following:

.

Use the brake to get to the
desired lower speed. Move the
control toward SET

–

and release

the accelerator pedal. The
vehicle will now cruise at the
lower speed.

.

Move the control toward SET

−

and hold until the desired lower
speed is reached, then
release it.

Summary of Contents for 2011 SRX CROSSOVER

































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2011 SRX CROSSOVER

Ford E-Transit 2022 Manual preview
E-Transit 2022
Brand: Ford Pages: 22
Yutrax TX107 Operator'S Manual preview
TX107
Brand: Yutrax Pages: 8
BrandMotion FLTW-7511 Installation Manual preview
FLTW-7511
Brand: BrandMotion Pages: 6
Cadillac STS 2011 Owner'S Manual preview
STS 2011
Brand: Cadillac Pages: 529
Toro 07389 Installation Instructions Manual preview
07389
Brand: Toro Pages: 16
Cadillac 2004 Seville Customer Convenience/Personalization Manual preview
2004 Seville
Brand: Cadillac Pages: 20
Pyle PLRD146 User Manual preview
PLRD146
Brand: Pyle Pages: 8
Uniden BTSC1100 Owner'S Manual preview
BTSC1100
Brand: Uniden Pages: 16
Chevrolet LUMINA 1995 Owner'S Manual preview
LUMINA 1995
Brand: Chevrolet Pages: 324
HUSKY LINERS 47954 Installation Instructions preview
47954
Brand: HUSKY LINERS Pages: 4
iOttie HLCRIO138 Manual preview
HLCRIO138
Brand: iOttie Pages: 19
Jaeger 21360505J Fitting Instructions Manual preview
21360505J
Brand: Jaeger Pages: 13
Haltech PLATINUM HT051202 Quick Start Manual preview
PLATINUM HT051202
Brand: Haltech Pages: 10
Mini COOPER Convertible Owner'S Manual preview
COOPER Convertible
Brand: Mini Pages: 168
Weather Guard 234-3-01 Installation Manual preview
234-3-01
Brand: Weather Guard Pages: 8
Toyota 20111 Highlander Brochure preview
20111 Highlander
Brand: Toyota Pages: 9
Mazda 2004 Mazda3 Quick Tips preview
2004 Mazda3
Brand: Mazda Pages: 12
70mai UP03 User Manual preview
UP03
Brand: 70mai Pages: 47

Brands by name

Popular brands

Load more brands