Cadillac 2011 SRX CROSSOVER Owner'S Manual Download Page 19

Page: 19 / 416

Black plate (13,1)

Cadillac SRX Owner Manual - 2013 - 1st crc - 7/2/12

In Brief

1-13

Turns the dome lamp on.

Reading Lamps

There are reading lamps on the
overhead console and over the rear
passenger doors. These lamps
come on when any door is opened.

To manually turn the reading lamps
on or off:

For the overhead console
reading lamps, press the

next to each lamp.

For the rear passenger reading
lamps, press the lamp lens.

For more information on interior
lighting, see

Instrument Panel

Illumination Control on page 6

‑

Exterior Lighting

The exterior lamp control is on the
instrument panel to the left of the
steering column.

There are four positions:

Briefly turn to this position to

turn the automatic light control off or
on again.

AUTO:

Turns the headlamps on

automatically at normal brightness,
together with the parking lamps,
taillamps, license plate lamps, and
instrument panel lights.

;

Turns the parking lamps on

together with the taillamps, license
plate lamps, and instrument panel
lights.

Turns the headlamps on

together with the parking lamps,
taillamps, license plate lamps, and
instrument panel lights.

For vehicles with fog lamps,

press to turn the lamps on or off.

See:

Exterior Lamp Controls on
page 6

‑

Daytime Running Lamps (DRL)
on page 6

‑

Summary of Contents for 2011 SRX CROSSOVER

































































































































































































































































































































































































































Search results

Summary of Contents for 2011 SRX CROSSOVER

Reviews:

Related manuals for 2011 SRX CROSSOVER

Brands by name

Popular brands

Cadillac 2011 SRX CROSSOVER, Owner'S Manual

Search results

Summary of Contents for 2011 SRX CROSSOVER

Reviews:

Related manuals for 2011 SRX CROSSOVER

Brands by name

Popular brands