Cadillac 2011 Escalade Owner'S Manual Download Page 20

Page: 20 / 548

Black plate (14,1)

Cadillac Escalade/Escalade ESV Owner Manual - 2011

1-14

In Brief

AUTO:

Automatically turns on the

headlamps at normal brightness,
along with the parking lamps,
instrument panel lights, license plate
lamps, and taillamps.

;

Turns on the parking lamps,

along with the instrument panel
lights, license plate lamps, and
taillamps.

Turns on the headlamps,

parking lamps, instrument panel
lights, license plate lamps, and
taillamps.

For more information, see:

Exterior Lamp Controls on
page 6

‑

Daytime Running Lamps (DRL)
on page 6

‑

Fog Lamps on page 6

‑

Windshield Wiper/Washer

The lever is on the left side of the
steering column.

Single wipe, turn to

, then

release. Several wipes, hold the
band on

longer.

Turns the windshield

wipers off.

Turn the band up for more

frequent wipes or down for less
frequent wipes.

Slow wipes.

Fast wipes.

Push the paddle at the top of

the lever to spray washer fluid on
the windshield.

Rear Wiper Window Wiper/Washer

To turn the rear wiper on, slide the
lever to a wiper position.

Turns the wiper off.

Turns on the rear wiper delay.

Turns on the rear wiper.

Press the button on the end of

the lever to spray washer fluid on
the rear window.

See

Windshield Wiper/Washer on

page 5

‑

and

Rear Window Wiper/

Washer on page 5

‑

Summary of Contents for 2011 Escalade





































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2011 Escalade

Reviews:

Related manuals for 2011 Escalade

Brands by name

Popular brands

Cadillac 2011 Escalade, Owner'S Manual

Search results

Summary of Contents for 2011 Escalade

Reviews:

Related manuals for 2011 Escalade

Brands by name

Popular brands