Cadillac 2011 CTS COUPE Owner'S Manual Download Page 18

Page: 18 / 514

Black plate (12,1)

Cadillac CTS/CTS-V Owner Manual (Include Mex) - 2012

1-12

In Brief

Passenger Sensing

System

United States

Canada and Mexico

The passenger sensing system will
turn off the right front passenger
frontal airbag under certain
conditions. The driver airbag,
seat

�

mounted side impact airbags

and the roof

�

rail airbags are not

affected by the passenger sensing
system. See

Passenger Airbag

Status Indicator on page 5

�

for

more information.

The passenger airbag status
indicator will be visible on the
instrument panel when the vehicle
is started.

Mirror Adjustment

Exterior

Controls for the outside power
mirrors are on the driver door.

To adjust each mirrors:
1. Press (A) or (B) to select the

driver or passenger side mirror.

2. Press the arrows on the control

pad to move the mirror up,
down, right, or left.

3. Adjust each mirror so that a little

of the vehicle and the area
behind it can be seen.

4. Press (A) or (B) again to

deselect the mirror.

See

Power Mirrors on page 2

�

Interior

The vehicle has an automatic
dimming inside rearview mirror.
Automatic dimming reduces the
glare of headlamps from
behind you.
See

Automatic Dimming Rearview

Mirror on page 2

�

Summary of Contents for 2011 CTS COUPE



































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2011 CTS COUPE

Reviews:

Brands by name

Popular brands

Cadillac 2011 CTS COUPE, Owner'S Manual

Search results

Summary of Contents for 2011 CTS COUPE

Reviews:

Brands by name

Popular brands