Cadillac 2011 CTS COUPE Owner'S Manual Download Page 125

Page: 125 / 514

Black plate (3,1)

Cadillac CTS/CTS-V Owner Manual (Include Mex) - 2012

Storage

4-3

Cargo Management

System (Wagon Only)

Press the bottom of the load floor
handle assembly to lift the top on
the handle. Pull up on the handle
to open the cargo management
system.

The cover can be opened to two
positions to allow access to the
storage area.
Some items may be stored in the
cargo area when the cover is
closed.

D-Ring Sliders

There are four D-Ring sliders that
move along rails on both sides of
the cargo management area.
These can be used as tie-downs
when storing cargo.

Installing D-Ring Sliders

To install the D-Ring slider (A),
insert it into the channel (B) located
in the middle of each rail.

Summary of Contents for 2011 CTS COUPE



































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2011 CTS COUPE

Reviews:

Related manuals for 2011 CTS COUPE

Brands by name

Popular brands

Cadillac 2011 CTS COUPE, Owner'S Manual

Search results

Summary of Contents for 2011 CTS COUPE

Reviews:

Related manuals for 2011 CTS COUPE

Brands by name

Popular brands