Cadillac 2011 Cadillac DTS, Owner'S Manual

Page: 351 / 470

Black plate (41,1)
Cadillac DTS Owner Manual - 2011
{
WARNING:
Fans or other moving engine parts can injure you
badly. Keep your hands away from moving parts
once the engine is running.
5. Check that the jumper cables do not have loose or
missing insulation. If they do, you could get a
shock. The vehicles could be damaged too.
Before you connect the cables, here are some
basic things you should know. Positive (+) will go
to positive (+) or to a remote positive (+) terminal if
the vehicle has one. Negative (
− ) will go to a
heavy, unpainted metal engine part or to a remote
negative (
− ) terminal if the vehicle has one.
Do not connect positive (+) to negative ( − ) or you
will get a short that would damage the battery and
maybe other parts too. And do not connect the
negative (
− ) cable to the negative ( − ) terminal on
the dead battery because this can cause sparks.
6. Connect the red positive (+) cable to the remote
positive (+) terminal location on the vehicle with the
dead battery. Use a remote positive (+) terminal if
the vehicle has one.
7. Do not let the other end touch metal. Connect it to
the positive (+) terminal location of the vehicle with
the good battery. Use a remote positive (+) terminal
if the vehicle has one.
8. Now connect the black negative ( − ) cable to the
negative ( − ) terminal location of the vehicle with the
good battery. Use a remote negative ( − ) terminal if
the vehicle has one.
Do not let the other end of the cable touch
anything until the next step. The other end of the
negative (
− ) cable does not go to the dead battery.
It goes to a heavy, unpainted metal engine part or
to a remote negative (
− ) terminal on the vehicle
with the dead battery.
6-41