Cadillac 2011 Cadillac DTS, Owner'S Manual

Page: 273 / 470

Black plate (111,1)
Cadillac DTS Owner Manual - 2011
Listing Stored Numbers
The list command will list all the stored numbers and
name tags.
Using the “ List ” Command
1. Press and hold
b g
for two seconds.
2. Say “ Directory ” .
3. Say “ Hands Free Calling ” .
4. Say “ List ” .
Making a Call
Calls can be made using the following commands.
Dial or Call: The dial or call command can be used
interchangeably to dial a phone number or a stored
name tag.
Digit Dial: This command allows a phone number to be
dialed by entering the digits one at a time.
Re ‐ dial: This command is used to dial the last number
used on the cell phone.
Using the “ Dial ” or “ Call ” Command
1. Press and hold
b g
for two seconds.
2. Say “ Dial ” or “ Call ” .
3. Say the entire number without pausing or say the
name tag.
Once connected, the person called will be heard
through the audio speakers.
Using the “ Digit Dial ” Command
The digit dial command allows a phone number to be
dialed by entering the digits one at a time. After each
digit is entered, the system repeats back the digit it
heard followed by a tone.
If an unwanted number is recognized by the system,
say
“ Clear ” at any time to clear the last number.
To hear all of the numbers recognized by the system,
say
“ Verify ” at any time.
1. Press and hold
b g
for two seconds.
2. Say “ Digit Dial ” .
3. Say each digit, one at a time, that you want to dial.
After each digit is entered, the system repeats
back the digit it heard followed by a tone. After the
last digit has been entered, say
“ Dial ” .
Once connected, the person called will be heard
through the audio speakers.
4-111