Cadillac 2010 Escalade Hybrid, Owner'S Manual Addendum

Page: 77 / 112

A vehicle specific Tire and Loading Information label is
attached to your vehicle. This label shows your
vehicle's original equipment tires and the correct
inflation pressures for your tires when they are cold.
The recommended cold tire inflation pressure, shown
on the label, is the minimum amount of air pressure
needed to support your vehicle's maximum load
carrying capacity.
For additional information regarding how much weight
your vehicle can carry, and an example of the Tire and
Loading Information label, see
“ Loading Your Vehicle ” in
the Index of the owner manual. How you load your
vehicle affects vehicle handling and ride comfort. Never
load your vehicle with more weight than it was designed
to carry.
When to Check
Check your tires once a month or more.
How to Check
Use a good quality pocket-type gage to check tire
pressure. You cannot tell if your tires are properly
inflated simply by looking at them. Radial tires may look
properly inflated even when they're underinflated.
Check the tire's inflation pressure when the tires are
cold. Cold means your vehicle has been sitting for at
least three hours or driven no more than 1 mile (1.6 km).
Remove the valve cap from the tire valve stem. Press
the tire gage firmly onto the valve to get a pressure
measurement. If the cold tire inflation pressure matches
the recommended pressure on the tire and loading
information label, no further adjustment is necessary.
If the pressure is low, add air until you reach the
recommended amount.
If you overfill the tire, release air by pushing on the
metal stem in the center of the tire valve. Recheck the
tire pressure with the tire gage.
Be sure to put the valve caps back on the valve stems.
They help prevent leaks by keeping out dirt and
moisture.
6-27