Adding Coolant
If you need more coolant, add the proper DEX-COOL
®
coolant mixture at the coolant surge tank, but only
when the engine is cool.
{
CAUTION:
You can be burned if you spill coolant on hot
engine parts. Coolant contains ethylene glycol,
and it will burn if the engine parts are hot
enough. Do not spill coolant on a hot engine.
When replacing the pressure cap, make sure to turn
the cap until it clicks.
Coolant Surge Tank Pressure Cap
Notice: If the pressure cap is not tightly installed,
coolant loss and possible engine damage may occur.
Be sure the cap is properly and tightly secured.
The coolant surge tank pressure cap must be fully
installed on the coolant surge tank. See Engine
Compartment Overview on page 5-12 for more
information on location.
Engine Overheating
You will find an ENGINE OVERHEATED IDLE ENGINE
message or an ENGINE OVERHEATED STOP ENGINE
message displayed in the Driver Information Center
(DIC). See DIC Warnings and Messages on page 3-73
for more information. You will also hear a chime.
There is also an engine temperature warning light
and/or gage on the instrument panel cluster. See Engine
Coolant Temperature Warning Light on page 3-61 and
Engine Coolant Temperature Gage on page 3-62.
5-25
Summary of Contents for 2008 DTS
