Cadillac 2007 Escalade Owner'S Manual Download Page 486

Page: 486 / 570

8. Attach the jack handle, extension, and wheel

wrench to the jack and place it (with the
wheel blocks) under the vehicle toward the
front of the rear bumper.

9. Position the center lift point of the jack under

the center of the spare tire.

10. Turn the wheel wrench clockwise to raise the

jack until it lifts the end fitting.

11. Continue raising the jack until the spare tire

stops moving upward and is held firmly in
place so that the secondary latch has released
and the spare tire is balancing on the jack.

486

Summary of Contents for 2007 Escalade



























































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2007 Escalade

Reviews:

Cadillac 2007 Escalade, Owner'S Manual, Page: 486 / 570

Search results

Summary of Contents for 2007 Escalade

Reviews: