manualshive.com logo in svg

Cadillac 2007 Escalade, Owner'S Manual, Page: 374 / 570

Share
Download
Cadillac 2007 Escalade Owner'S Manual Download Page 374

Dolly Towing

Two-Wheel-Drive Vehicles (Rear Wheels
Off the Ground)

Notice:

If you tow a two-wheel-drive vehicle

with the rear wheels on the ground, the
transmission could be damaged. The repairs
would not be covered by your warranty. Never
tow your vehicle with the rear wheels on the
ground.

Two-wheel-drive vehicles should not be towed
with the rear wheels on the ground.
Two-wheel-drive transmissions have no provisions
for internal lubrication while being towed.

Two-wheel-drive vehicles can be towed on a dolly
with the front wheels on the ground provided
that the wheels are straight.

Use the following procedure to dolly tow your
vehicle:

1. Drive the vehicle up onto the tow dolly.

2. Shift the transmission to PARK (P).

3. Turn the engine off, but leave the ignition on.

4. Firmly set the parking brake.

5. Securely attach the vehicle being towed to the

tow dolly.

6. Release the parking brake only after the

vehicle being towed is firmly attached to
the towing vehicle.

Autoride

®

The Autoride

®

feature provides improved vehicle

ride and handling under a variety of passenger and
loading conditions.

The system is fully automatic and uses a computer
controller to continuously monitor vehicle speed,
wheel to body position, lift/dive and steering
position of the vehicle. The controller then sends
signals to each shock absorber to independently
adjust the damping level to provide the optimum
vehicle ride.

Autoride

®

also interacts with the tow/haul mode

that, when activated, will provide additional control
of the shock absorbers. This additional control
results in better ride and handling characteristics
when the vehicle is loaded or towing a trailer.
See “Tow/Haul Mode” under

Towing a Trailer

on page 375

for more information.

374

Summary of Contents for 2007 Escalade



























































































































































































































































































































































































































































































































































































Reviews:

No comments