{
CAUTION:
Each top tether bracket is designed to anchor
only one child restraint. Attaching more than
one child restraint to a single bracket could
cause the anchor to come loose or even break
during a crash. A child or others could be
injured if this happens. To help prevent injury
to people and damage to your vehicle, attach
only one child restraint per bracket.
Anchor the top strap to one of the following anchor
points. Be sure to use an anchor point located on the
same side of the vehicle as the seating position
where the child restraint will be placed.
Raise the head restraint and route the top strap under
it. See Head Restraints on page 1-7.
Once you have the top strap anchored, you will be
ready to secure the child restraint itself. Tighten the top
strap when and as the child restraint manufacturer’s
instructions say.
Top Strap Anchor Location
The top strap anchors are located on the floor of the
vehicle behind the second row seat. There is one anchor
for each second row seat position.
Do not secure a child restraint with a top strap in the right
front passenger’s position or in the third row if a national
or local law requires that the top strap be anchored, or if
the instructions that come with the child restraint say that
the top strap must be anchored. There is no place to
anchor the top strap in these positions.
1-39
Summary of Contents for 2005 SRX
