Cadillac 2005 Cadillac Escalade EXT Owner'S Manual Download Page 355

Page: 355 / 460

To replace a front turn signal, sidemarker or DRL bulb,
do the following:

1. Remove the headlamp assembly as described

previously. See Headlamps on page 5-53 for
more information.

2. Remove the rubber, circular-shaped bulb cap for

the affected bulb from the headlamp assembly.

3. Press the locking release lever, turn the bulb

socket counterclockwise and remove it from
the headlamp assembly. (There is no lock for
the sidemarker lamp.)

4. Remove the old bulb from the bulb socket.

5. Put the new bulb into the bulb socket.

6. Put the bulb socket into the turn signal housing

and turn it clockwise until it locks. (There is no
lock for the sidemarker lamp.)

7. Reverse the steps to reinstall.

Taillamps

To replace a taillamp bulb, do the following:

A. Stoplamp/Taillamp

B. Turn Signal

Lamp/Taillamp

C. Back-Up Lamp

1. Open the tailgate. See Tailgate on page 2-21 for

more information.

5-57

Summary of Contents for 2005 Cadillac Escalade EXT













































































































































































































































































































































































































































































Search results

Summary of Contents for 2005 Cadillac Escalade EXT

Reviews:

Related manuals for 2005 Cadillac Escalade EXT

Brands by name

Popular brands

Cadillac 2005 Cadillac Escalade EXT, Owner'S Manual

Search results

Summary of Contents for 2005 Cadillac Escalade EXT

Reviews:

Related manuals for 2005 Cadillac Escalade EXT

Brands by name

Popular brands