Adding Washer Fluid
The LOW WASHER FLUID message will be displayed
on the Driver Information Center (DIC) when the
fluid is low.
The windshield washer
fluid reservoir is located in
front of the underhood
fuse block on the driver’s
side of the vehicle.
Open the cap with the washer symbol on it. Add washer
fluid until the tank is full.
Notice:
•
When using concentrated washer fluid, follow
the manufacturer’s instructions for adding
water.
•
Don’t mix water with ready-to-use washer fluid.
Water can cause the solution to freeze and
damage your washer fluid tank and other parts
of the washer system. Also, water doesn’t
clean as well as washer fluid.
•
Fill your washer fluid tank only three-quarters
full when it’s very cold. This allows for
expansion if freezing occurs, which could
damage the tank if it is completely full.
•
Don’t use engine coolant (antifreeze) in your
windshield washer. It can damage your
washer system and paint.
5-34
Summary of Contents for 2004 XLR
