Cadillac 2004 CTS, Owner'S Manual

Page: 131 / 442

If your vehicle is equipped with the Navigation system,
do the following:
1. Press the MAIN button located to the lower left of
the display.
2. Press the multi-function button next to the Setup
prompt at the right of the display.
3. Press the multi-function button next to Prog SWC
located at the right of the screen.
4. Turn the TUNE/SEL knob to scroll through the
available functions.
5. Once the function desired is highlighted, press and
hold the multi-function button next to the control you
wish to program (1, 2, 3 or 4). The buttons are
located at the right of the display.
When a control is successfully programmed, the
function you selected will appear next to the number
of the control at the right of the display.
6. Press the multi-function button next to the Back
prompt to exit each menu. If you desire to program
another control, repeat the procedure.
Each function can only be used once. When you program
a control with a function, that function is removed from the
list of functions available. It will return to the list if you
remove it from the SWC it is programmed to by
programming another function to that control.
Turn Signal/Multifunction Lever
The lever on the left side of the steering column
includes the following:
•
Turn and Lane-Change Signals
•
Headlamps
•
Headlamp High/Low Beam-Changer
•
Flash-To-Pass Feature
•
Fog Lamps
•
Cruise Control
For more information on the exterior lamps,
see
Exterior Lamps on page 3-20.
3-9