1-4
Power Seats (If Equipped)
The power seat controls are located on the outboard side
of each front seat cushion.
D Move the front of the control up or down to adjust
the front portion of the cushion up or down.
D Move the rear of the control up or down to adjust
the rear portion of the cushion up or down.
D To adjust the seat height, lift up or push down on
the center of the control.
D To move the seat forward or rearward, slide the
control in the desired direction.
If a failure in the power supply system occurs, the power
seats can be manually adjusted by inserting the crank
handle into the slot located below the seat cushion
(as shown in the above illustration).
The crank handle is provided in the tool kit located in
the trunk (with the jack).
Turn the crank handle clockwise until you’ve reached
your desired seating position (manually moving the seat
requires turning the crank handle many times).
