Thank you for selecting CADEX WheelSystems, a highly engineered and innovative bicycle wheel solution
which will help you achieve your performance goals. Following the instructions below will ensure that
you get the most performance from your equipment and that it will continue to perform at the highest
level. If you have any questions about anything covered in this manual, please contact your authorized
CADEX retailer.
IMPORTANT:
This manual contains important safety, performance and service information. Make sure
you are familiar with the information provided in the manual prior to installing your new
wheels or before going on your first ride and keep it for future reference.
For further information, please visit: www.cadex-cycling.com
。
Compliance with the following instructions concerning assembly, handling, maintenance and care of
your CADEX wheels is essential to provide proper and safe operation. Disregarding these instructions
can lead to accidents resulting in serious injuries or even death.
。
CADEX WheelSystems are designed and intended for use on a bicycle. The wheel or its components
should not be used for any other applications or as a tool or toy, or in any manner other than that
described in this user’s manual. Otherwise, it is at the user’s own risk. If you are not sure about the
intended use of your WheelSystem, please consult your local authorized CADEX retailer for the intended
use of the WheelSystem.
。
Use CADEX or Giant Tubeless tire products that meet the ETRTO dimension standards to be compatible
with CADEX tubeless WheelSystem.
。
The tubular tire needs to use the proper size for CADEX tubular WheelSystems.
。
CADEX tubeless tires are always the best match for CADEX Tubeless WheelSystems. Should you
choose to use a non-CADEX tire, we have created a CADEX approved list of tires that we have tested
to be 100% compatible with CADEX rims. To ensure your safety and to maintain your
CADEX limited warranty, use only the tires listed on the CADEX Approved Tire List.
If necessary, you may use an inner tube on a CADEX tubeless rim, so long as the tire
you are using is on the CADEX Approved Tire List.
The CADEX Approved Tire List can be found on
www.cadex-cycling.com/global/cadexapproved.
。
Using brake pads or tires that are not compatible or recommended by CADEX may result in damage to
your WheelSystem and void the warranty.
。
For CADEX Tubular WheelSystems, please refer to the tire manufacturer’s instructions for tubular tire
installation.
!
WARNING
!
!
WARNING
BEFORE RIDING
。
Ensure that the wheels are compatible with all other parts such as type of brake, skewers, cassette,
tire, valve and rim tape. Additionally, ensure that the wheels are properly installed prior to
your first ride.
。
If you encounter difficulties or are uncertain about anything identified in this user’s manual, please
contact your local authorized CADEX retailer.
If the wheel is not installed correctly or is improperly maintained, it may be dangerous and cause
accidents with serious injury.
ASSEMBLY A
Using CADEX Tubeless WheelSystems with
tubeless tires:
CAUTION
：
When installing CADEX Tubeless WheelSystem (including rim tape, tubeless valve,
tubeless sealant, and tubeless tire), please refer to the set up instructions issued by CADEX or consult
your local authorized CADEX retailer.
1. When installing a tubeless tire on your CADEX
Tubeless WheelSystem, use it in combination
with the CADEX tubeless rim tape, tubeless valves,
tubeless sealant and tubeless tire. If your wheels
are to be used with rim brakes, we recommend
the use of CADEX heat resistant tubeless rim tape.
If you have question, please contact your
authorized CADEX retailer.
END
Overlap
Valve
Start
Rim
Figure 1
15cm
15cm
2. When installing the rim tape, Ensure the tape
is set in the center of the rim bed, covers the
entire width of the tire well and make sure
that the tape overlaps 15cm on both sides of
the valve hole (see Figure 1).
3. For the installation of the tubeless valve, please
see Figure 2 and Figure 3.
Ensure that the provided O-ring seal is positioned
correctly between lock-ring and rim (see Figure 2)
Attach the lock-ring to the valve and tighten it finger tight.
Do not use any kind of tools to tighten the valve lock-ring.
01
02
Figure 2
Figure 3
