Cadel SIRE3 PLUS, Instructions For Installation, Use And Maintenance Manual

Page: 33 / 48

33
vEGA - sIRE
3
pLUs - DoGE
3
pLUs - sFERA
3
- sFERA
3
pLUs - pRINCE
3
- pRINCE
3
pLUs - GLoBE - tREND - ELIsE
3
pLUs
EN
Fig. 60 - Hopper and auger cleaning
The hand rejector grid must not ever be removed fron its housing. Clean the hopper bottom
and the visible part of the auger exclusively as shown in the picture (see
Fig. 60 page 33 ).
14.4 FUME CHAMBER AND FUME pAssAGEs CLEANING
Every season (or every 1500 operation hours) the fume chamber and the fume passages cleaning must be
executed.
• Remove the sides of the stove according to the model:
vEGA / sIRE
3
pLUs / pRINCE
3
/ tREND / pRINCE
3
pLUs
: remove the side upper screws (see
Fig. 61 page 33
and
Fig. 62 page 33
), then remove the side completely (see
Fig. 63 page 33 ).
Fig. 61 - Removing the upper screw Fig. 62 - Removing the rear screw Fig. 63 - Removing the side
DoGE
3
pLUs
: remove the lower screws from the central panel (see
Fig. 64 page 33
) and then remove the
panel (see
Fig. 65 page 33 ).
Fig. 64 - Removing the lower screws Fig. 65 - Removing the central panel
sFERA
3
/ sFERA
3
pLUs:
unhook the side panels (see
Fig. 66 page 34 ).