28
vEGA - sIRE
3
pLUs - DoGE
3
pLUs - sFERA
3
- sFERA
3
pLUs - pRINCE
3
- pRINCE
3
pLUs - GLoBE - tREND - ELIsE
3
pLUs
EN
Pay attention if the value is positive or negative..
12.6
FAILED IGNItIoN
If the pellets do not burn, the failed ignition will be indicated by the alarm "FAILED IGNITION".
• If the room temperature is lower than 10°C, the plug is not able to bear the ignition stage. To support it please
insert some pellets in the burning pot and a piece of burning firelighter igniter material on the pellets (for
example firelighters cubes).
• Too much pellets in the burning pot, or humid pellet, or sooty burning pot make ignition difficult and create
dense white smoke which is harmful to health and can cause explosions on the combustion chamber. It is
therefore necessary not to stand in front of the stove during ignition stage if dense white smoke is present.
If after some months the flame appears weak and/or orange colored or the glass tends
to blackens and the burning pot to become encrusted, clean the stove, clean the fume
conduit and the chimney flue.
12.7
poWER FAILURE
• After a black-out lower than 5 seconds, the stove turns back to the power which was settled.
• After a black-out of more than 5 seconds, the stove enters the "COOLING WAIT" phase. Completed this
phase, it starts automatically up with the different phases (see
).
12.8
tEMpERAtURE sEttING
• To modify the ambient temperature it is sufficient to press P1 and P2 keys according to the desired temperature
inside the menu "SET TEMP ROOM".
• To see the set temperature, press once P1 key.
12.9
FUME tEMpERAtURE
To check the fume temperature at the exhaust it is sufficient to keep pressed P2 key.
12.10
sWItCHING oFF
To switch the stove off, keep pressed P4 key: the display shows "FINAL CLEANING". After about 10 minutes, also the
fume fan switches off (this happens always, independently if the stove is hot or cold). Then "OFF" will be shown.
12.11
CLoCK sEttING
• Press P3 key and then P5 key till underlining "SET CLOCK" menu (02).
• Press once P3 (DAY) and with P1 and P2 keys select the day of the week (Monday, Tuesday, Wednesday,
Thursday, Friday, Saturday, Sunday).
• Press for the second time P3 key (HOURS) and with P1 and P2 keys set the hour.
• Press for the third time P3 key (MINUTES) and with P1 and P2 keys select the minutes. Press for the fourth time
P3 key (DAY) and with P1 and P2 keys select the day of the month (1,2,3...29,30,31).
• Press for the fifth time P3 key (MONTH) and with P1 and P2 keys select the month:
• Press for the sixth time P3 key (YEAR) and with P1 and P2 keys select the year.
• To exit from the programme press P4 twice.
12.12
DAILY pRoGRAMMING
It allows to enable, disable and settle the daily chronothermostat functions.
Press P3 key and then P5 key till the menu "SET CHRONO" Press once P3 key and with P5 and P6 keys select the
"PROGRAM DAY". Press once P3 till finding "CHRONO DAY". With P1 and P2 keys put in "OFF" or "ON". It is possible
to set two working times delimited by the set times.
After "CHRONO DAY":
• Press P5: the display shows "START 1", with P1 and P2 keys set the ignition time value or put in "OFF".
• Press P5: the display shows "STOP 1", with P1 and P2 keys set the switching off time value or put in "OFF".
• Press P5: the display shows "START 2", with P1 and P2 keys set the ignition time value or put in "OFF".
• Press P5: the display shows "STOP 2", with P1 and P2 keys set the switching off time value or put in "OFF".
• Press P4 key three times to exit from the menu.
12.13
WEEKEND pRoGRAMMING
It allows to enable, disable and settle the chronothermostat functions during saturday and sunday.
Press P3 key and then P5 key till the menu "SET CHRONO". Press once P3 key and with P5 and P6 keys select
"PROGRAM WEEKEND". Press once P3 till finding "CHRONO WEEKEND". With P1 and P2 keys put in "OFF" or "ON". It
is possible to set two working times delimited by the set times and valid only for saturday and sunday.
Summary of Contents for SIRE3 PLUS
Page 47: ...NOTE...
