SATURNO 16 - 24
20
If the above precautions are not respected and there is a pellet overload in the brazier during ignition and subsequent abnormal
smoke generated in the combustion chamber, carefully follow these instructions:
• Do not, for any reason, unplug the product from the electrical mains: this would stop the smoke extraction fan, resulting in
smoke being emitted into the room.
• Pre-emptively open the windows to air any smoke out of the installation room (the chimney may not work normally)
• Do not open the fire door, as this would compromise normal operation of the smoke exhaust system to the chimney.
• Simply switch off the stove using the on/off button on the control panel (not the rear button of the power supply plug!) and
move away from the product as you wait for the smoke to clear completely.
• Before any attempts to reignite the product, thoroughly clean the brazier and its air passage holes from build-up and any unburnt
pellets; reposition the brazier in its housing, removing any residue from its support base. If the product repeatedly fails to ignite,
we recommend that you stop using it immediately and contact a qualified technician to check product and chimney operation.
12 FUEL
12.1 FUEL
• Use top-quality pellets because they have influence in the calorific value and in ash remains.
• Pellets features are: dimension Ø6-7mm (D06 Class), maximum lenght 40 mm, calorific value 5kWh/kg, humidity ≤ 10%, ash
remains ≤ 0,7%, they must be correctly pressed and not much mealy, without sizing agents, resins and other additives (class
A1 pellets according to ISO 17225-2 (type ENplus-A1) are recommended).
• Not adequate pellets cause a bad combustion, a frequent burning pot obstruction and exhaust conduits obstruction. Further it
decreases the calorific value, soils the glass and increases consumptions and ash and unburnt granules quantity.
Humid pellets cause a bad combustion and running, so please assure you that they are stored in dry places and
far at least one meter from the stove and/or any other source of heat.
• It is advisable to try different type of pellets available on the market and to choose that which gives the best performance.
• The use of bad quality pellets can damage the stove so that the warranty and manufacturer liability fall.
• Pellets of variable quality and size are available on the market: the smaller the pellet, the greater the fuel supply, resulting in
poor combustion
Depending on the type of pellets it could be necessary a parameters adjustment, please contact an Authorized
Assistance Service.
12.2 PELLET SUPPLY
Fig. 12 - Wrong opening of the pellets bag
Fig. 13 - Right opening of the pellets bag
It is necessary to avoid to fill the hopper with the pellet when the stove is running.
• Do not get the bag of pellet in contact with hot stove surfaces.
