13
KOBE - FENICE - SPARK - INDACO - PRINCE
8
USE
8.1
INTRODUCTION
To have the best performance with the lowest consumption please follow the here descripted instructions.
• The lightning of the pellets occurs very easily if the installation is correct and if the chimney flue is efficient.
•
Switch on the stove at Power 5,
for at least 2 hours, in order to enable the materials which make up the boiler and the
fireplace to adjust the inner springing stress. After 2 hours, the smell of paint and smoke will disappear.
• By using the stove the varnish inside the combustion chamber could be subjected to alterations. This occurrence can be attri-
buted to different reasons: an excessive stove overheating, the presence of chemical agents in bad quality pellets, bad chimney
draught, etc. Therefore varnish endurance in the combustion chamber cannot be guarantee.
Oily plant waste and lacquers can cause smells and smoke during the first working hours: it is advisable to
ventilate the room because they could be noxious to people and animals.
Set values from 1 to 5 are defined by the manufacturer and they can be changed only by an authorized tech-
nician.
The product will be subject to expansion and contraction during the ignition and cooling stages, therefore
slight creaking noises may be heard. This is perfectly normal as the structure is made of laminated steel and
must not be considered a defect.
8.2
CONTROL PANEL DISPLAY
Menu items.
Fig. 8 - Control panel
Fig. 9 - Control panel (wi-fi)
Fig. 10 - Display
LEGEND
Fig. 8|Fig. 9|Fig. 10
1
Boiler lighting/shutdown (ESC)
2
Scrolling of programming menu to decrease
3
Menu
4
Scrolling of programming menu to increase
5
Decrease set temperature/programming functions
6
Increase set temperature/programming functions
7
Display
8
Time
9
Status
10
Temperature set by user
11
Instant power
12
Ambient temperature
13
If there is "." = 0.5 °C (29.° = 29.5°)
14
Wi-Fi connection (optional - see dedicated manual)
