manualshive.com logo in svg

Cadel ATENA3 PLUS 12, Installer Manual

Share
Download
Cadel ATENA3 PLUS 12 Installer Manual Download Page 29

29

ATENA3 PLUS 12/14 - DUKE 12/14 AIRTIGHT - SABA 12/14 - MITHOS3 PLUS 12/14

5.21  STOVE CALIBRATION AND DEPRESSION MEASUREMENT

This stove has a pickup point positioned on the tank in order to measure the depression of the combustion chamber and verify its 

proper operation.

To do this, proceed as follows:

•  Unscrew nut “D” on the rear of the stove and connect a digital pressure switch with a tube to detect the negative pressure (see 

Fig. 89

 or 

Fig. 90

).

•  Load the feed screw via appropriate function.

•  Start the stove and set "Set_Flame" to power 1 (the start-up time of this stove lasts between 8 and 10 minutes to ensure 

minimum draught).

•  Compare the read values with those on the table.

•  Change power every 10 minutes and wait for it to stabilise.

•  Access the user menu and, if necessary, change the parameters.

Fig. 89 - Digital pressure switch connection (Atena

3

 Plus12/14 - Duke 12/14 At - Saba 12/14)

DATA

P1

P2

P3

P4

P5

Stove depression - temperature 12 kW

20 Pa - 105°C 32 Pa - 135°C 45 Pa - 165°C 63 Pa - 195°C 73 Pa - 215°C

Stove depression - temperature 14 kW

20 Pa - 105°C 32 Pa - 140°C 40 Pa - 170°C 52 Pa - 205°C 63 Pa - 225°C

Fig. 90 - Digital pressure switch connection (Mithos

3

 Plus12/14)

DATA

P1

P2

P3

P4

P5

Stove depression - temperature 12 kW

17 Pa - 95°C

28 Pa - 130°C 37 Pa - 155°C 52 Pa - 180°C 58 Pa - 220°C

Stove depression - temperature 14 kW

17 Pa - 95°C

26 Pa - 140°C 45 Pa - 175°C 55 Pa - 220°C 68 Pa - 240°C

NB: for good combustion, the depression values must be b -5 Pa and the temperature values b - 10°C.

Summary of Contents for ATENA3 PLUS 12









































Reviews:

No comments

Brands by name

Popular brands

Load more brands