*
Sensor
Adopt ½.7
”High Resolution AHD sensor.
*
Auto Gain Control (AGC)
Built-in auto gain control
(AGC)
circuit. The color
Camera can get high definition picture in low Lux
Condition.
*
Auto Electronic Shutter (AES)
Built-in auto electronic shutter function. The color
Camera’s AES speed can reach
1/100,000s
.
*
Gama Characteristic
Camera Gama characteristic is
0.45.
*
Scanning Mode
NTSC or PAL mode.
*
Night-time Vision
0 Lux with 3PCS LED. Adopt US high quality
IR LED, having very good night-vision effect.
TVI/ CVI/ CVBS/ AHD
12V DC
Power Supply
BRIEF OF PRODUCT
Notes
●
The power supply must through safe attestation.
Its output voltage
Current
、
voltage polarity and
operating temperature must match the
Camera’s requirement
.
●
When using the camera in the thunderbolt
condition
,
please note to mount Anti-thunder device
or put off the power supply plug and cable
.
●
In order to capture high quality pictures, the
power supply’s cable and video output cable should
not be too long.
TROUBLE & SOLUTION
1. No Picture after providing power
. May be the power supply voltage abnormity, please check the
power Supply voltage and pole whether exactitude
.
. Please check all the connecting cable and monitors whether be
connected correctly or not
.
2. The picture level direction have flowing interference ripples
. May be caused by the power supply AC ripples, it need filter the
wave of the Power supply
.
. Check the monitor and peripheral equipment
’s used.
3. The picture background color changes continuously
. The fluorescent lamps electromagnetic field cause color roll.
This is proper Phenomenon of the cameras.
. Reduce the fluorescent lamp numbers or increase the distance
between the camera and the fluorescent lamps can improve it.
. Use power supply external sync. Camera can solve it
.
4. The picture smear too mass
. The power supply’s voltage unstable
.
. Connecting cables not connect correctly or have high impedance
CONNECTING
INTRODUCTION
Congratulations on your purchase of this
product.
This User Guide suits CA-NBSN52AHD/4 series
product. We adopt the latest CMOS technical of
sensor and driver. The most attractive
characteristics are water-resistant, and widely
applicable to day & night, indoor & outdoor. In
addition, it owns the characters of high
definition and stability, strong anti-jamming,
rich and real color. Fixing and using this model
are convenient too. It is very good for you to
apply to yours CCTV system.
Please read this instruction manual carefully to
ensure proper use of the product.
To prevent fire or shock hazarded. Do not expose the
unit into water too long time directly.
The symbol is intended to alert the user to the presence
of important operating and maintenance (servicing)
Instructions in the literature accompanying the
appliance.
The symbol is intended to alert the user to the presence
of uninsulated
‘dangerous voltage’ within the product’s
Enclosure that may be of sufficient Magnitude to
constitute a risk of electric shock to persons
.
Note
●
Please note the camera’s operating temperature
and its using environment requirement. Avoid using
the camera at too high or too low temperatures. The
operating temperature is -10
℃
-50
℃
.
(Recommendatory operating temperature is -5
℃
--40
℃
.)
●
never make the camera face the sun or bright
object. Otherwise, it will damage the CCD
.
●
Do not mount the camera near by the radiator or
heater.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER OR BANCK NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING TO OUALIFIED
SERVICE PERSONNEL.
CAUTION: To prevent electric shocks and risk of fire hazards,
do NOT use other than specified power source.
Link wire rule
：
Video
Power
