background image

Approximate

Temperatures

L:  175F

l

:  200F

l

:  225F

l

:  250F

l

:  275F

l

:  300F

l

:  325F

l

:  300F

l

:  325F

M: 350F

l

:  375F

l

:  400F

l

:  425F

l

:  450F

H: 475F

M: 350F

L:

175F

= OFF

l

H:

475F

2

3

HOW TO USE

(Before using for the first time, become familiar with the griddle features, Figure B.

Wash griddle in warm sudsy water, rinse and dry.  

Do not submerge plug or let the

plug come in contact with any liquid.

 )To "season" the nonstick properties of the

surface coating, rub the cooking surface of the griddle lightly with cooking oil.  

Season

with each use to maintain the nonstick properties.

1. Prepare food for cooking.

2.   Plug unit into appropriate 3-prong wall socket. Press power rocker switch to “On” and

turn heat control to desired temperature. 

Preheat griddle for at least 5 minutes

before placing food on it.

 Pilot light will turn off when selected temperature is

reached. During cooking, pilot light  will go on and off, indicating desired temperature

is being maintained.

3. Because the griddle features a nonstick finish, food may

be prepared with or without shortening, according to taste.

4. Place food on griddle and cook according to temperature

time table (page 4). Heat should be adjusted according to

personal preference and particular food being cooked.

Temperatures and times in the table are 

approximate

.

5. Turn heat control to 

l

(OFF) when cooking is completed.

Then press power rocker switch to OFF. Unplug from wall

outlet. 

Allow unit to cool completely before removing

grease tray to empty, or removing splash guard.

 Grease

tray  and  splash  guard  are  made  of  stainless  steel  for

durability. During use, they get 

very hot

. Extreme care

should  be  used  when  handling,  emptying,  etc.  As  a

precaution, always use a hot mitt or potholder.

CARE AND CLEANING

Before initial use and after each subsequent use, disassemble splash guard and

wash griddle and splash guard with warm sudsy water, rinse and dry.  DO NOT

IMMERSE GRIDDLE OR PLUG IN WATER OR LET PLUG COME IN CONTACT WITH

ANY LIQUID.  Season the cooking surface after each cleaning by rubbing with cooking

oil to maintain the nonstick properties.

To maintain the integrity of the nonstick coating, only nylon, plastic, wooden or

rubber utensils should be used. Metal utensils may be used, but over time they will wear

This is a UL Listed appliance. The following important safeguards are

 recommended by most portable appliance manufacturers.

IMPORTANT SAFEGUARDS

To reduce the risk of personal injury or property damage when using electrical

appliances, basic safety precautions should always be followed, including the

following:

1.     

READ ALL INSTRUCTIONS.

2. Do not touch hot surfaces. Use handles. Use hot mitts or potholders.

3. To protect against electrical shock, do not immerse unit base, cord or plug

 in  water or other liquid.

4. Close supervision is necessary when any appliance is used by or near 

children.

5. Unplug from outlet when not in use and before cleaning. 

Allow to cool 

before putting on or taking off parts, and before cleaning the appliance

.

6. Do not operate any appliance with a damaged cord or plug or after the 

appliance malfunctions or has been damaged in any manner.  

Contact the Cadco Factory Service Department at (860) 738-2500 

for examination, repair or adjustment. In Canada call (905) 825-9665

.

7. The use of accessory attachments not recommended by the appliance 

manufacturer may cause injuries.

8. Do not use outdoors.

9. Do not let cord hang over edge of table or counter or touch hot surfaces.

10. Do not place on or near a hot gas or electric burner or in a heated oven.

11. It is recommended that this appliance not be moved when it contains hot 

oil  or other hot liquid.

12. ALLOW GREASE TRAY TO COOL COMPLETELY BEFORE REMOVING.

13.  To disconnect, turn heat control to "OFF", push power rocker switch to OFF,

       then remove plug from wall outlet

14.   Do not use appliance for other than intended use.

SAVE THESE INSTRUCTIONS

CAUTION:  

For safety's sake, when using non-stick cookware or electric appliance with

nonstick coatings, keep your pet birds out of the room.  Birds have respiratory systems

that are sensitive to many kinds of fumes, including fumes from overheated nonstick

cookware.

NOTE:

 A short power supply cord (or cord set) has been provided to reduce the hazards

resulting from becoming entangled in or tripping over a longer cord. Longer cord sets or

extension cords may be used if care is properly exercised in their use. If a long cord set

or extension cord is used, the marked electrical rating of the cord set or extension cord

should be at least as great as the electrical rating of the appliance.  The longer cord should

be arranged so that it will not drape over the counter top or table top where it can be

pulled on by children or tripped over accidentally.

ASSEMBLY

Please read these instructions carefully. Refer to Figure A.

1. Place unit securely on table or counter.

2. Position the splash guard on the cooking surface with the long side parallel to the

back of the griddle, and the splash guard arms facing forward. The back of the splash

guard should sit on the back of the cooking surface.

3. Position the two metal tabs of the splash guard into the slots in the thumbscrews on

each side of the griddle. You may need to push the sides in toward the griddle housing

to get the tabs positioned in the slots. This should keep the splash guard snugly fitted

to the griddle. (There is no need to turn the thumbscrews.) Press down to seat the

splash guard on the griddle.

4. To remove for cleaning, pull splash guard up until the side tabs disengage from the

side thumbscrew slots. 

Allow unit to cool before removing splash guard.

5.  Slide grease tray into place at the bottom fronmt of the griddle. Never use the griddle

without grease tray in place.  

Allow unit to cool before removing grease tray.

Figure B

Figure A

Non-stick

Cooking

Surface

Grease

Tray

Heat

Control

Splash Guard

Tab

Splash Guard

Power

Rocker

Switch

Pilot

Light

Thumbscrews

Tab

(Models CG-10/20 shown)

Reviews: