background image

9

9

14. Warranty

 

CADAC (Pty) Ltd hereby warrants to the ORIGINAL PURCHASER of this CADAC gas appliance, that it will be free of defects in material 

and workmanship from the date of purchase as follows:

 

Valves: 

  2 

Years

 

Plastic parts: 

 

No Warranty

 

Enamel parts: 

 

2 Years

 

Cast Iron:  

 

2 Years

 

Painted Frames: 

 

1 Year

 

Burners: 

  1 

Year

 

The warranty will only apply if the unit is assembled and operated in accordance with the printed instructions.

 

CADAC may require reasonable proof of your date of purchase.  THEREFORE, YOU SHOULD RETAIN YOUR SALES SLIP OR INVOICE.

 

This Limited Warranty shall be limited to the repair or replacement of parts that prove defective under normal use and service and 

which on examination shall indicate, to CADAC’s satisfaction, they are defective.  Before returning any parts, contact the customer 

service representative in your region using the contact information provided with your manual. If CADAC confirms the defect and 

approves the claim, CADAC will elect to replace such parts without charge.  CADAC will return parts to the purchaser, freight or 

postage prepaid.

 

This Limited Warranty does not cover any failures or operating difficulties due to accident, abuse, misuse, alteration, misapplication, 

vandalism, improper installation or improper maintenance or service, or failure to perform normal and routine maintenance, including 

but not limited to damage caused by insects within the burner tubes, as set out in this owner’s manual.

 

Deterioration or damage due to severe weather conditions such as hail, hurricanes, earthquakes or tornadoes, discoloration due to 

exposure to chemicals either directly or in the atmosphere, is not cover by this Limited Warranty.

 

There are no other express warrants except as set forth herein and any applicable implied warranties of merchantability and fitness are 

limited in duration to the period of coverage of this express written Limited Warranty.  Some regions do not allow limitation on how 

long an implied warranty lasts, so this limitation may not apply to you.

 

CADAC is not liable for any special, indirect or consequential damages. Some regions do not allow the exclusion or limitation of 

incidental or consequential damages, to this limitation or exclusion may not apply to you.

 

CADAC does not authorize any person or company to assume for it any obligation or liability in connection with the sale, installation, 

use, removal, return, or replacement of its equipment; and no such representations are binding on CADAC.

 

This Warranty applies only to products sold at retail.

 

To enjoy and ensure longevity of your CADAC product, please refer to the cleaning and maintenance section of the user manual with 

particular attention to the care of the Stainless Steel.

Image

Description

Part Number

127mm Wok burner top cap outer ring

99600-SP042

Pot stand 220x458mm (4B Hob)

99600-SP035

Pot stand 257x384mm (5B Hob)

99600-SP036

Pot stand 280x384mm (5B Hob)

99600-SP037

EU Type EG 1/2” Tailpiece

8154-27

Summary of Contents for 99600-42-01-ZA













Reviews: