12
12
Transport Module
1
3
4
2
Fig. 6
Removing / mounting transport module 1
Removing
X
Remove the tear-off plate/cutter.
X
Remove the casing.
X
Unplug the connector (1) of the label sensor (2).
X
Move the label sensor as far as possible to the operator’s side
w
Operator’s Manual.
X
Remove screw (3) and 5 screws (4).
5
6
8
2
7
Fig. 7
Removing / mounting transport module 2
X
If the printer is equipped with a cutter connection cable :
• Remove control panel.
• Unplug connector (5 / fig. 5) from the control panel.
X
Remove the transport module (7) with the printing roller (6) by tilting from the chassis (5).
X
Pull the cutter connection cable (8) downward out of the transport module (7).
Mounting
X
Mount the assembly units in reverse order.
Replacing Assembly Units
Summary of Contents for EOS 1
Page 1: ...Service Manual Label Printer EOS ...
Page 7: ...7 Block Diagram ...
