7
TURBO SETTING
S
TURBO: The unit on the high fan speed generates quick
cooling or heating so the room temperature can quickly
approach the setting value.
In the COOLING or HEATING mode press FUNCTION until
the unit enters the TURBO mode then press ENTER/CANCEL to
confirm.
When the TURBO function is activated, press FUNCTION to
enter the TURBO mode and then press ENTER/CANCEL to
cancel (see Fig. 15).
Fig. 15
-
Turbo mode
BLOW SETTING
S
BLOW Function: After the unit turns off, the water in
the indoor unit’s evaporator automatically evaporates to
avoid mildew.
In the COOLING or DRY modes, press FUNCTION until the unit
enters the BLOW mode and then press ENTER/CANCEL to
activate the function.
When the BLOW function is activated, press FUNCTION, under
the BLOW mode interface, then press ENTER/CANCEL to
cancel the function (see Fig. 16).
Fig. 16
-
Blow mode
NOTE:
When BLOW is activated and the user turns off the unit by pressing ON/OFF or with the remote controller, the indoor fan will run
at low speed for 2 minutes, and “BLOW” appears on the LCD. If BLOW is deactivated, the indoor fan turns off. The BLOW
function is unavailable in the FAN or HEATING mode.