3
WIRED REMOTE CONTROLLER BUTTONS
Enter/cancel
Enter/Cancel
Fan
Mode
Function
Timer
On/Off
1
4
5
6
7
8
2
3
Fig. 4
-
Wired Remote Controller Buttons
WIRED REMOTE CONTROLLER BUTTON FUNCTIONS
Table 2—Controller Button Functions
No.
Name
Function
1
Enter/Cancel
Function selection and cancellation
2
Running temp. setting of the indoor unit, range: 60.8
°
F~86
°
F (16
°
C~30
°
C)
Timer setting, range:0.5-24 hr.
6
3
Fan
Setting of the high/middle/low/auto fan speed
4
Mode
Setting of the Cooling/Heating/Fan/Dry/Auto mode of the indoor unit
5
Function
Switchover among the functions of Turbo/Save/Blow etc..
7
Timer
Timer setting
8
On/Off
Turn on/off the indoor unit
4+2
Press together for 5s under the unit’s OFF state to ENTER/CANCEL the
memory function (if the memory is set the indoor unit, after a power failure and
the power recovery, will resume it’s original setting state. If not, the indoor unit
is default to OFF after a power recovery. MEMORY OFF is the default before
delivery).
3+6
Press at the same time under the unit’s OFF state,
appears on the
wired controller for the cooling only unit, while
appears on the wired
controller for the cooling and heating unit.
2+6
Upon startup of the unit without malfunction or under the unit’s OFF state,
press them at the same time for 5s to enter the lock state, in which case,
any other buttons will not respond. Repress them for 5s to quit the state.
4+6
Mode
If there is a preference for
°
F rather than
°
C (default), under the OFF state, press
and hold MODE and decrease temperature set point buttons together for 5
seconds.