10
Manual
wall. If the structure of your wall is different, corresponding installation material must be
used. In any case, consult a specialist.
• Make sure to observe the correct thread size during installation of the display screen to
the wall bracket.
5 Installation:
ATTENTION! Only trained professionals are authorized to inspect the wall, as well
as install and remove the product! For more information please read the Chapters
“Notes on Safety” and “Troubleshooting”.
Wall Installation:
1
Please use the wall bracket as a template to mark the holes to
be drilled in the wall using a level. Check, if gas or water pipes,
or power lines are behind the wall before drilling. Use a 10 mm
stone drill to bore the holes to a depth of 60 mm. Insert one
dowel (E) into each of the drilled holes. Now, use the 6 wall
screws (D) to attach the wall bracket.
Installation of Display Screen:
2
Use screws (J), and the adjusting screw (H) to attach the
screen bracket to the receptacle. Use the supplied screws (A),
(B), or (C) to fasten the screen bracket to your display screen.
CAB WH EASYSCOPE M (25-74 cm) CAB WH EASYSCOPE Multi (25-74 cm)
Layout of Cables:
CAB WH EASYSCOPE M (25-74 cm) CAB WH EASYSCOPE Multi (25-74 cm)
Lay out the cables as illustrated in the adjacent picture (Fig. 4).
Step 1
Step 2
Step 3
Summary of Contents for CAB WH EASYSCOPE M 51928
Page 50: ...50 Οδηγίες Χρήσης ...
Page 51: ...51 TM ...
