11
TM
dealer will repair the fault either on site, or send the device to the manufacturer. You
make the work of our technicians considerably easier, when you describe possible
faults in detail – only then you can be assured that faults occurring only rarely will be
found and repaired with certainty!
• If your dealer cannot be contacted, you can also contact us directly.
• The manufacturer is not liable for damages to persons or property caused by improper
installation or operation not described in this guide. This includes, among others, any
alteration and modification of the product and its accessories.
• Any use other than described in this user‘s guide is not permitted, and causes loss of
warranty, loss of guarantee, and non-liability.
• We reserve our right for misprints and changes of the device, packing, or user‘s guide.
7 Care, Maintenance, Storage, and Transport:
• Use a dry linen cloth to clean your product, or use a slightly moist cloth for heavy
stains. Look out for live cables of your device during cleaning! Pull the plug prior to
cleaning!
• Make sure no body parts will be pinched in the swivel device, when parts of the device
are swiveled!
ATTENTION! There is a risk of electric shock and bruises!
• Make sure there is sufficient space around the display unit to ensure proper ventilation,
and check the clearance of the system, if necessary.
• Periodically check, if all attachments and screws are secured, and tighten them again
when they are loose. This may be caused for example by frequent movements.
• Avoid places with high temperatures, humidity, or places which can become wet, also
during care, maintenance, storage, and transport.
• Drill holes are still visible on the wall after the device and the wall installation kit is
removed. After use for a longer time period, a spot may remain on the wall.
• Follow the safety symbols on the packing during transport.
Problem
How can the wall quality
be tested?
Which holes must be
drilled?
The wall bracket is hard
to align.
Correction
Check the wall thickness,
and the material below
plaster and wallpaper.
Consult trained professi
-
onals.
Please read the
Chapters „Parts
Package“ and „Installati
-
on“.
Ask a second person for
help, and observe the
Marking
Live loads for living space
are listed for example in
standards such as DIN
1055, and N 594.
Holes are marked in
drawings.
8 Troubleshooting:
