10
Manual
wall. If the structure of your wall is different, corresponding installation material must be
used. In any case, consult a specialist.
• Make sure to observe the correct thread size during installation of the display screen to
the wall bracket.
5 Installation:
ATTENTION! Only trained professionals are authorized to inspect the wall, as well
as install and remove the product! For more information please read the Chapters
“Notes on Safety” and “Troubleshooting”.
Wall Installation:
1
Please use the wall bracket shown in figure 1 as a template to
mark the position of attachment to the wall using a level.
Check, if water or gas pipes, or power lines are behind the
wall before drilling! Use a 10 mm stone drill to bore the holes
with a depth of 60 mm. Insert dowels (E) into the 3 drilled
holes. In doing so, a hammer can be useful. Drive the screws
(D) into the holes. Now, you can hook the wall brackets onto
the screws previously attached.
Installation of Display Screen
:
2
Use the supplied screws (A), (B), or (C) to fasten the screen
bracket to your display screen. The standard bracket is suitable
for VESA 50mm / 75mm / 100mm / 200mm, and 200mm x
100mm.
Adjustment:
ATTENTION! Always hold the display screen during the
entire adjustment, or ask a second person to help you!
Drive the adjusting screw in the top view one or two turns in a counter-clockwise
direction. Adjust the display screen to the desired inclination. Tighten the adjusting screw
again in top view in clockwise direction.
Step 1
Step 2
Step 3
The installation is completed. Please proceed in reverse
order for disassembly.
note:
6 Warranty and Liability:
• The manufacturer warrants this new device for 2 years.
• As the manufacturer has no influence on the wall type and the installation of the wall
installation kit, warranty of the product only applies to the installation kit.
• If any fault or damage is detected on your device, please contact your dealer and
provide your sales slip or invoice as evidence of the purchase, if necessary. Your
