cabstone 95147, User Manual, Page: 16 / 140

User Manual
16
4.2 Operating by battery
1. Charge the SoundOne completely like described in chapter 4.1.
2. Unplug the SoundOne from mains when fully charged.
The mobile operating time is up to 13 hrs.
4.3 Charging the mobile device
>> Connect the charging cable to the 5 V USB output of the SoundOne
and to your mobile device.
See the charging status of your mobile device at its battery indicator.
5 Connecting and disconnecting devices
5.1 Connecting devices by bluetooth
1. Switch the ON/OFF switch to ON.
The SoundOne automatically starts the Bluetooth mode.
2. Switch on the Bluetooth function of your mobile device.
3. Search “SoundOne“ in the device list and connect it.
If your mobile device requires a password, enter “0000“ .
After successfully connecting, a short beep tone sounds.
The SoundOne is now ready for playing music.
5.2 Connecting devices by Bluetooth via NFC
1. Switch the ON/OFF switch to ON.
The SoundOne automatically starts the Bluetooth mode.
2. Switch on the NFC function of your mobile device.
3. Hold the NFC sensor of your mobile device to the SoundOnes‘ NFC sensor.
Your mobile device automatically starts the Bluetooth mode and requires
confirming of the connection.
4. To confirm the connection request with the soundOne.
After successfully connecting, a short beep sounds.
The SoundOne is now ready for playing music.
5.3 Disconnecting the Bluetooth connection
>> Press both buttons and simultaneously for disconnecting.
5.4 Connect and disconnect devices by audio cable
>> Connect the supplied audio cable to the stereo input jack of the
SoundOne and your mobile device.
>> Switch the ON/OFF switch to ON.
The Bluetooth mode is deactivated.
>> Disconnect all cable connections after use and to reactivate Blue-
tooth
function.
5.5 Taking the device out of operation
1. Disconnect all Bluetooth and cable connections when not in use.