background image

24

2018 KITE USER MANUAL

GLOSSARY

FREQUENTLY USED KITEBOARDING 
& WIND TERMINOLOGY

 A 

   

SPRINT TUBES 

Tubes that connect the LE bladder to the strut bladders.

AIRLOCK - a 2 part valve that allows a single point for infla-

tion and deflation of the kite.

SPRINT PINCH CLAMPS 

Clips that prevent air transfer between the LE and the 

struts.

B 

   

BAR (unit) – A unit of pressure

• 1 bar = 14 PSI

• 1 mbar = 0.015 PSI

PSI – A unit of pressure. Pounds per square inch

• 1 PSI = 68.9mbar

BEAUFORT SCALE

A system for estimating wind strength based on the effects 

wind has on the physical environment (e.g. the behavior 

of waves, smoke, etc.). Instruments are not used to deter-

mine wind strengths in this point scale (O = calm to 12 

= hurricane).

BODY DRAGGING

This is an instructional tactic / step in which the rider flies 

the kite while in the water, but without the board. The rider 

will launch, then walk to the water, and basically drag in the 

water while practicing flying, re-launching and self-rescue 

techniques.

BLADDER

The inner inflatable tube found within the leading edge and 

the struts of the kite. (Imagine a bike-it has both a tire on the 

outside and an inner tube which holds air).

BRIDLES

The lines that hang from the wing tips and leading edge of 

the kite. The flying lines will be attached from the control 

bar to these bridle lines in order to connect control bar 

to kite.

Tow Points – The attachment points for the bridle.

BYPASS™ LEASH SYSTEM

A security leash feature that is recommended for all users.  

This system incorporates QR2 which will separate the User 

from the Kite if QR1 has been activated.

C 

   

CENTERLINE ADJUSTMENT STRAP (CAS) 

Used to depower the kite by changing the relationship between 

the front and back line lengths. It is also used to position the 

bar closer to the rider.

CONTROL BAR

The steering device the rider uses to steer the kite. 

D 

   

DE-POWER LINES

The two center flying lines that attach to the leading edge 

bridles on the kite-one to the left wing tip, the other to the 

right wing tip. These lines assist in de-powering the kite.

DOWNWIND

The direction in which the wind is traveling.

F 

   

FLYING LINES

A term used to describe all four of the lines included with 

your kite package. These lines connect the bridle lines on 

the kite to the leader lines on the control bar and are typi-

cally 20-30 meters in length.

G 

   

GUSTY WIND

Wind is inconsistent and varies considerably from one 

wind strength to another.

GYBING

The motion in which the rider changes the direction of the 

board he/she is riding. The rider switches from a starboard 

tack to a port tack or vice versa. 

H 

   

HARNESS

A piece of equipment used to temporarily attach the rider 

to the control bar harness line. This enables the rider to 

save energy by utilizing their body weight and all of their 

muscles to hang on to the kite. Most common are the waist 

harness (attaches around the torso) and the seat harness 

(attaches to the waist and around the legs). 

I    

INFLATABLE KITE

A kite with inflatable tubes designed to float the kite and to 

facilitate water re-launchability.

Summary of Contents for Switchblade 2018































Reviews: