1
2020 FOIL USER MANUAL
1. Locate and confirm foil mounting hardware (4 hex bolts and 4 T-nuts).
2. Start two of the brass nuts onto the screws by just a couple turns (Fig 1).
3. Use the screw head to insert the nut into both of the tracks (one each) and slide
down near the end. (Fig 2).
4. Unscrew and leave the brass nuts sitting near the bottom of each track. For Alloy
top plate, repeat this process for 2 remaining screws as shown in Fig 3.
5. Insert a screw into both of the counter sunk front holes of the Carbon foil top plate
and attach both of the brass nuts with only a couple of turns so they can drop into
the track. (Fig 4).
FOIL KIT INSTALLATION - ASSEMBLY WITH THE BOARD
FUSION
HYBRID
INVENTORY::
1. Alloy mast (70cm or 90cm)
2.. Aluminium rear fuselage
3. 4 x m6 x 30 screws
4. 1 x m6 x 25 screw
5. T30 & T 40 torx T-handle wrench
NOTE:
Mast / board assembly - T40 torx T-handle wrench
Foil assembly - T30 torx T-handle wrench
Board mounting screws sold with board
INVENTORY::
1. Carbon Mast (70cm)
2. 3 x mast threaded inserts
3. 4 x m6 x 30 screws
4. 1 x m6 x 25 screw
5. Carbon Rear Fuselage
6. T30 & T40 torx T-handle wrench
FUSION
CARBON
AUTOPILOT, X:BREED FOIL, CUTLASS FOIL, CROSSFLY, MACRO BOARDS:
FIG 1
FIG 4
FIG 3
FIG 2
