background image

iii

RECOMMENDED KITEBOARDING PRACTICE:

Kiteboarding is an extremely diverse sport, with many disciplines and ability levels. As with all sports, 

there can be certain inherent risks. The following contains key security points to remember when operat-

ing your Cabrinha kite.
•  Kiteboarding is a HAZARDOUS activity and the use of Kiteboarding equipment involves the risk of serious 

personal injury to any part of the user’s body, or death.

•  Injuries are an INHERENT RISK of kiteboarding and the participation in kiteboarding implies the user’s 

acceptance and assumption of those risks.

•  Children should ALWAYS be under adult supervision.
•  It is strongly recommended that beginners take lessons.
•  ALWAYS inspect your equipment for signs of wear and tear each time before use, particularly all lines, 

canopy, bladders, screws and fittings.

•  If ANY products are found to show signs of wear & tear, STOP using the product immediately and repair 

or replace before further use. If in doubt about any signs of wear & tear, please contact your local vendor. 

Contact details are available from www.cabrinhakites.com 

•  NEVER place yourself in a situation where breakage of any one of the various kiteboarding components 

would pose a risk to yourself or others, or make it difficult to return to the shore securely & unassisted.

•  Make sure you use properly designed and manufactured parts from reputable suppliers.
•  Take time to study the conditions including sea state, tides, currents, weather conditions and forecasts 

before you decide to go sailing. Beware of sailing in offshore, onshore, variable or strong winds.

•  Familiarize yourself with any new location before venturing onto the water. Ask the locals to tell you about 

any hazards.

•  Watch out for other beach users, especially swimmers and small children. Make sure you keep your board 

and rig under control at all times and that they don’t get blown about on the beach or in the water.

•  Always use appropriate protective gear and flotation devices. Wear the correct protective clothing for the 

conditions such as a wetsuit or a UV top. 

•  We STRONGLY recommend wearing a kiteboarding specific helmet
•  Make sure someone knows where you’ve gone & when you are expected back – always sail with a buddy.
•  Be aware of the conditions as they change. ALWAYS return to the beach if there is a significant change in 

the conditions. i.e. wind dropping or wind & waves increasing.

•  As you learn the sport, work within your own limitations and do NOT exceed them.
•  Do NOT alter, modify or change this product.
•  This product is designed and manufactured only for kiteboarding on water or snow.
•  Keep these warnings, cautions and instructions for future reference. 

Summary of Contents for FUSION HYBRID










Reviews: