Assembling your Caboost Car Seat
1. Remove Caboost from box.
2. Remove all other wrapping from Caboost.
3. Unroll and open air valve. Allow Caboost to expand leave to stand for a
minute. Once Cabosst has taken shape.
4. Locate air valve at side of seat and ensure valve is properly screwed in then
remove top cap (by unscrewing).
5. Blow into air valve until seat reaches full capacity or until it is not possible to
inflate further by mouth.
Do not use mechanical or air pump to inflate
.
6. Replace cap (by screwing tightly).
DO NOT OVERTIGHTEN
7. Position Caboost on seat (See Pages 14).
8. Position Child on Caboost Car Seat.
9 Pass the lap belt of the seatbelt under both arms of the Caboost, ensuring it
runs over the child’s pelvis, and pass the shoulder belt of the seat belt ONLY
under the armrest. The fronts of the armrests are connected to the seat
base, by means of the male and female clipping system. The male locates
into female (key)hole at the front and is pulled backwards to lock into place.
This action is reversed to release the clip.
10. Seat belt should rest firmly against the child and the lap straps worn low
downacross the child’s lap. Ensure straps are not twisted. For correct
positioning of seat belt.
11. Buckle Seat Belt.
10
Inflated
Deflated
19746 CABO Manual.indd 10
22/04/2016 18:25
