Hi-Speed Internet User Guide
6
The TCP/IP protocol must be installed, as this step enables you to be identified on
the Internet. Without this information, you will not be able to access the Internet. It
is therefore important that you make sure that the data you enter is accurate. Please
refer to the “Important Information” section of this document.
Before configuring the IP address, make sure that the physical components are
working properly. The network interface card needs to have been configured and the
modem installed in order to do this.
2.1 CONFIGURING IN WINdOWS xP
Please note that the following screens may look different on your computer
depending on the display settings selected.
1- Click
Start -> Settings -> Control Panel.
The Network and Dial-up Connections shortcut might appear and, if so, select it
and go directly to Step 3.
2 - Double-click
Network and dial-up Connections
. A summary of the connections
will appear if you have several types of connections. It is not unusual to see an
analog modem connection (dial-up connection) and a network connection
(Local Area Network).
2
. CONFIGURING TCP/IP PROTOCOL
