installed in this amplifier to compensate for this slope in cable resulting in a flat
frequency response at the output
8. TROUBLESHOOTING
a. Ensure you are using quality multiple shielded cables with quality radial or
compression F-connectors.
b. Ensure the F-connector’s center conductor is making solid contact with the
CTA-30RK-1000’s In and Out ports, and the appropriate headend combiner and RF
distribution network connectors.
c. When taking measurements it is always best to use a quality signal level meter.
System level measurements should be taken from the CTA-30RK-1000’s Out port. For
field maintenance, the CTA-30RK-1000’s Test port may be used. However, note that
port is padded down -30dB and the 30dB must be added back in when determining
system level settings and output.
d.
Further troubleshooting assistance can be found on-line at
www.northamericancable.com
and
www.cabletronix.com
in addition to support from
Cabletronix sales engineers at 1-610-429-1511.
This is a notice to inform you that content passing thru this device may contain strong
language or depictions of violence, sex or substance abuse. This unit contains no
parental control features. Parental discretion is advised
5
