INSTALLATION
NOTE TO INSTALLER
Warning
: The installer of this product must verify that
the mounting surface will safely support the combined
weight of all attached equipment and hardware. This
product must be mounted on wall studs or concrete
for a secure, stable, and reliable mounting. North
American Cable Equipment, Inc. will not be held liable
for the improper use or installation of this product.
1. UNPACKING and HANDLING
Each unit is shipped with all necessary mounting hardware.
Ensure that all accessories are removed from the container before discarding packing material
2. MECHANICAL
INSPECTION
3. INSTALLATION
a. Predetermine the best possible viewing location for the monitor.
b. Attach the LCD wall plate to studs in the wall using with the appropriate hardware. The
wall plate MUST be attached to the studs. Lag screws have been included for wood
stud installation.
c. For VESA® 75mm pattern installation set aside the 100mm plate and the #10-24 acorn
nuts. Attach the 75mm plate to the LCD with screws appropriate for your monitor/TV.
M4 x 12mm x .7P have been provided.
d. For VESA® 100mm pattern installation attach the 100mm plate to the 75mm plate with
four #10-24 acorn nuts. Attach the 100mm plate to the LCD monitor/TV with screws
appropriate to your monitor. M4 x 12mm x.7P have been provided.
e. Wrap loose cords using cable ties. However, be sure to provide sufficient slack for the
full movement of arms.
3
Inspect the product for shipping damage. Make sure the equipment is clean and damage free.
If equipment appears to be damaged or defective please contact us
