Cabletron Systems SynOptics 3000 Series, Manual

Page: 69 / 101

Device Configuration
SynOptics IP Trap Receiver View
Configuration Views SynOptics Series 3000 Hub
3-26 Management Module Guide
Reset
Provides a button that allows you to reset the agent status. Selections are
Not_Resetting or Resetting. Writing a reset to this object will reset the NMM
and perform a download and restart.
Write Configuration Settings to NVRAM
Provides a button that allows you to write the configuration settings to
NVRAM. You may select Not_Writing or Writing.
SynOptics IP Trap Receiver View
The SynOptics IP Trap Receiver view provides a table of NMSs that are to
receive traps generated by this NMM. Double-click any entry to open the
SynOptics IP Trap Receiver Table, which provides the same information
(except that it contains no status field) in a modifiable format and allows you
to delete an entry.
This view provides the following information:
Status
Displays the action status for the entry. Setting to Invalid removes the entry
from the table and disassociates the address identified with the entry.
Network Address
Displays the IP address for trap server that is to receive the trap.
Community Name
Displays the community string used for traps sent to this trap receiver.
Age Time
Displays the time interval used to age entries out of the trap receiver table.
The default value, if not specified, will be 0 or infinite, never to be aged out.
Opens the SynOptics IP Trap Receiver Add Entry view. This view allows you
to enter the information in the IP Trap Receivers Table for an entry.
!
CAUTION
Updating the Reset or Restart field restarts the hub and causes momentary
network interruption.
Add IP Trap Receiver Table Entry