9030920 E6
Configuration Views
3-9
Ethernet Configuration
When the condition specified is overRate and the duration is greater than
five seconds, the Actual value is based on the data accumulated during the
entire duration window.
Set Value
Threshold setting value. This value must be set to a number greater than zero
for the following types of thresholds:
• lineError
• burstError
• arcFciError
• recvCongestionErr
• frameCopyError
• tokenError
• lostFrame
• beaconing
• goodOctets
• goodFrames
• utilization
Actual Value
Current value of the threshold counter. This value is set to zero at the
beginning of each duration window.
Action
Determines which action is to take place if the threshold condition occurs. The
possible values that can be read and written are listed below for each
threshold type:
• Port, Ring, and Station thresholds:
- noAction- Take no action.
- sendTrap- Send a trap.
• Port thresholds only:
- partSlotPort- Partition the port identified by the threshold Slot entry
and the threshold Port entry.
- trapPartSlotPort- Send a trap and partition the port identified by the
threshold Slot entry and the threshold Port entry.
NOTES
If the type of threshold is station, and the station is not on the same ring as
the NMM, this value will remain at zero, which will prevent the threshold
condition from ever being met.
This object is not used for evaluating the threshold condition, and will
remain at zero if the type of threshold is port.
Summary of Contents for SynOptics 3000 Series
