EMM-E6 User’s Guide
4-1
CHAPTER 4
ATTACHING A CONSOLE
This chapter describes how to attach a Local Management console to the
EMM-E6, and lists the setup and configuration requirements for:
•
console/terminal
•
console cable
•
console cable connections.
4.1
CONFIGURING YOUR TERMINAL
The following instructions outline how to configure your console
(terminal) to communicate with Local Management. Refer to your
specific terminal manual for more instructions if necessary.
To access Local Management for the EMM-E6, you need either:
•
a VT200 or VT300 series terminal
•
a PC emulating a VT200 or VT300 series terminal.
To access the Setup Directory on a VT series terminal, press F3. The
following table lists the required terminal setup for a VT series terminal.
CH1Book Page 1 Wednesday, March 20, 1996 7:48 AM
