An Overview of Management Views
3-3
MMAC-Plus Management Views
Location
An administratively assigned description of the Þrst detected client moduleÕs
location (set via the MIBIIÑ>SystemÑ>sysLocation object). Refer to your client
moduleÕs
MMAC-Plus Guide
for information on changing the moduleÕs location
name.
Up Time
The duration, in a days hh:ss:mm format, that the Þrst module detected in the
MMAC-Plus chassis has been powered up.
You will also notice a
Status Bar
at the bottom of the Chassis View. This status bar
will provide contact status information for the modules conÞgured in the chassis.
Changing the Current View
You can change the view between the Chassis, Environmental, and BackPlane
ConÞguration Views, as well as re-open the Chassis Setup View, as follows:
1.
Click on the View
drop-down list box in the lower right of the MMAC-Plus
window, and drag down to select Chassis, Environment, Backplane Config,
or Chassis Setup. The selected view will immediately appear.
or
1.
Click on View in the menu bar at the top of the MMAC-Plus window, and drag
down to select the desired view: Chassis, Environment, Backplane Config,
or Chassis Setup. A check will appear next to the selected view.
Changing the Default View
When you Þrst install MMAC-Plus Remote Management, the Chassis View is
selected as the default view when the application is initialized. You can select
another view to come up as the default view when MMAC-Plus Remote
Management is initialized. To do so:
1.
Click on Options in the menu bar at the top of the MMAC-Plus window, drag
down to select Default View and to the right to select the desired view:
Chassis, Environment, or BackPlane Config. A check will appear next to
the selected default view.
Note that selecting a default view will not switch the currently active view; it
will take effect the next time you initiate an MMAC-Plus management session.
