CHAPTER 3: INSTALLATION
3-8
SEHI USER’S GUIDE
To stack SEH non-intelligent hubs together:
1. Attach the SEH HubSTACK Interconnect cable to the “OUT” port on
the rear panel of the SEH as shown in Figure 3-7.
2. Attach the other end of the SEH HubSTACK Interconnect cable to the
“IN” port on the rear panel of the SEH next in the stack.
Figure 3-7. Stacking the SEHI
If one end of a HubSTACK Interconnect cable is disconnected without
disconnecting the other end attached to the hub, disconnect the cable from
the OUT port as shown in Figure 3-8 to ensure that the HubSTACK
Interconnect cable is terminated properly.
SEH HubSTACK
Interconnect Cables
REAR VIEW
SEHI Managing 4 SEH Non-Intelligent Hubs
SEHI HubSTACK
Interconnect Cable
1490_10
HubSTACK
10BASE-T HUB
WITH
LANVIEW®
SEH-24
OUT
IN
SEH INTERCONNECT
HubSTACK
10BASE-T HUB
WITH
LANVIEW®
SEH-24
OUT
IN
SEH INTERCONNECT
HubSTACK
10BASE-T HUB
WITH
LANVIEW®
SEH-24
OUT
IN
SEH INTERCONNECT
HubSTACK
10BASE-T HUB
WITH
LANVIEW®
SEH-24
OUT
IN
SEH INTERCONNECT
SEH INTERCONNECT OUT
HubSTACK
10BASE-T HUB
WITH
LANVIEW®
SEHI-24
