Cabletron Systems MRXI 10BASE-T, User Manual

Page: 27 / 35

USING THE DEVICE/PORT INFORMATION SCREEN
Page 4-4
NLNK (no link) - indicates that a link has not been established
on the currently selected port.
N/A (not applicable) - indicates that the currently selected port
is not a 10Base-T Twisted Pair or Fiber Optic Link port.
Command Menu Selections
EXIT - ends the current local management session and displays
the Password screen.
SAVE - saves the information currently displayed on the Device/
Port Information Screen. MRXI/LM displays:
MODIFIED SCREEN INFORMATION HAS BEEN SAVED!
PORT n - defines the Port number (1 through 14) related to the
currently displayed port information and designates the port
number used for the ENABLE PORT and DISABLE PORT
commands. To change the port selection, highlight this field and
use the plus (+) or minus (–) keys to increment or decrement the
port number to be acted upon.
RESET COUNTERS - sets the Packet, Receive Collision, and
Transmit Collision counters to zero.
COMMUNITY NAMES - displays the Community Names screen.
This path gives you access to the community names table and
allows setting names recognized by the HUB.
ENABLE PORT - enables the port currently designated by the
PORT n command.
DISABLE PORT - disables the port currently designated by the
PORT n command.
ENABLE ALL PORTS - enables all of the currently available
ports.
DISABLE ALL PORTS - disables all of the currently available
ports.